P51 CLP

Secure and unload the firearm. P51 is designed as a CLP and will clean, lubricate and protect your firearm and equipment.  

P51 is knife and firearm friendly and can be used on a large array of latches, swivels and surfaces experiencing friction and sliding.  

Always ensure that the can is facing away from your face and coat the targeted metal surface.  

Make use of the can's elongated spout to focus P51 at the target area. P51 will penetrate and clean the area immediately.  

Wipe sprayed surfaces with a clean cloth if excess oil is visible on the surface.  

Use this on everything that needs it; if it is stubborn or jammed it needs P51.

EXTREME ABILITY: Cleaning additive will work its magic on dirt, while the extra pressure of the can will draw it out.

Synthetic Based oil for use as a Cleaner, Lubricator and Protector (CLP).

Q: Is this oil good for o-rings?

A: Penetrating oils are rarely recommended for use on rubber. P51 had limited effect on o-rings and rubbers when tested. It is advised to rather make use of HP88 Lube when you aim to use it on rubbers and o-rings. This product was specifically designed for it. 

Q: Can this be used as a bore cleaner?

A: Yes, this formulation can act as a cleaner, especially for routinely cleaned rifles. It is also usefull for quick cleans. Remember it doesn't contain a copper remover so it is still advised to clean this out with the correctly applied solvents such as XTERMIN8R Bore Cleaner and or CuBUSTER.